What Is Included in a Door Hardware Kit? A Component Checklist for Wooden Bedroom, Bathroom and Main Doors

Category
Drawer Hardware
Published
Reading time
7 min read
LUMA Laher stainless steel door kit with every piece laid out

Overview

A typical LUMA door kit contains an aldrop, a pair of patti handles, tower bolts, a latch, a door stopper, and the U-clamps and brackets that hold the bolts on the frame side, all in one matching stainless steel or golden finish. These are surface-mounted fittings, so they screw onto the face of a wooden door rather than being cut into it. Hinges, key locks and door magnets are not part of the kit. You choose those separately for each door.

So what is included in a door hardware kit, and what is not? The answer matters when you are fitting out a new flat, replacing worn fittings or ordering for a site. This checklist explains each component, shows which parts suit a main door, a bedroom door and a bathroom door, and lists the items you still need to buy alongside the kit.

What is included in a door hardware kit: the core components

A complete door hardware kit is a matched set of fittings for one door. Buying them together means every piece has the same material and finish, and you do not have to hunt for a latch that matches handles bought months earlier. Here is what each LUMA kit component does:

  • Aldrop: a long sliding bolt with a loop for a padlock. It is usually fixed on the outer face of a main door or a store-room door so the door can be locked from outside.
  • Patti handles (pair): flat strip handles, one for each face of the door, so you can push and pull the door from both sides.
  • Tower bolts: round sliding bolts fixed on the inner face of the door. They slide into a bracket on the frame or floor and are typically placed at the top and bottom of the door for extra security from inside.
  • Latch: a smaller sliding bolt used for quick privacy, common on bedroom and bathroom doors.
  • Door stopper: stops the door from swinging into the wall, protecting both the wall and the handle.
  • U-clamps and brackets: the receiving parts fixed to the frame, so the aldrop and bolts have a solid point to slide into.

Exact contents, sizes and quantities vary from kit to kit, so always check the packing list or product page before you buy. You can compare designs and finishes across the full range of LUMA door hardware kits.

What is not in the kit, and what to buy alongside it

A door fittings set covers the surface hardware you use every day. A few items depend on the door size, the frame and how the room is used, so they are selected separately:

  • Hinges: LUMA offers pin hinges and welded hinges. The right size depends on the door height, thickness and weight, so hinges are chosen per door rather than packed into a kit.
  • Tubular key locks: if you want a door that locks with a key instead of a padlock, a tubular key lock is fitted in addition to the kit.
  • Door magnets and holders: these keep an open door from slamming shut in a draught. LUMA's door magnets and heavy PVC main door holders are a practical addition for balcony-facing rooms and main doors.
  • Screws and bolts: confirm whether fixing screws are supplied with the kit you choose. If you need extra or longer screws for a thicker door, LUMA also carries hardware screws and fasteners.

Need just one replacement part, such as a single aldrop or a pair of handles? LUMA sells aldrops, tadi and patti handles as loose door components, so you do not have to replace a full kit when only one item is worn.

Component checklist by door type

LUMA 20 20 stainless steel door kit, the pieces laid out separately

Not every door needs every component. Use this as a starting point and adjust it to your floor plan.

Main door

  • Aldrop on the outer face for padlocking when you leave home
  • Pair of patti handles
  • Tower bolts on the inner face, top and bottom
  • U-clamps and brackets for the aldrop and tower bolts
  • Door stopper or door holder
  • Bought separately: hinges, and a tubular key lock if you want key locking

The main door is the first thing visitors notice, so finish and design matter more here. For design ideas, read our guide to door handles and fittings for main doors.

Bedroom door

  • Pair of patti handles
  • Latch or tower bolt on the inner face for privacy
  • Door stopper, or a door magnet if the door tends to swing shut
  • Bought separately: hinges

An aldrop is usually unnecessary on a bedroom door unless the room doubles as a store room.

Bathroom door

  • Handles suited to frequent use
  • Latch or small tower bolt on the inner face
  • Door stopper if the door opens towards a wall
  • Bought separately: hinges

Bathroom doors need fewer parts and face more moisture. A compact set such as LUMA's stainless steel mini bathroom kits covers the essentials without extra pieces you will not use.

Choosing a finish: stainless steel or golden

LUMA golden door kit 4008 laid out, the golden finish beside the stainless steel kits above

LUMA door hardware kits come in stainless steel or golden finishes. Your choice depends on the room and the look of your interiors.

  • Stainless steel: a clean, modern look that suits contemporary flats. It is the practical choice for bathrooms and kitchen-side doors, where humidity and water splashes are common. Pune's long monsoon keeps indoor air damp for months, which is worth keeping in mind for any door near a wet area.
  • Golden: a warmer, traditional look that pairs well with teak-finish main doors and classic interiors. Many homes use golden fittings on the main door and stainless steel inside.

Whichever finish you choose, keep it consistent within a room. Mixing finishes on the same door is the most common styling mistake we see. For care, follow the manufacturer's cleaning instructions and avoid harsh acid-based cleaners on any metal finish.

How to check door fitting kits before you buy

For carpenters and homeowners alike, a few checks before purchase save return trips to the shop:

  • Match the contents to the door. Compare the kit's packing list with the door-type checklist above. A main door needs an aldrop; a bathroom door usually does not.
  • Measure the door and frame. Check the door thickness and the space on the frame for brackets and U-clamps. Tower bolts need room at the top and bottom of the frame.
  • Check screw length. Fixing screws should suit the door thickness so they grip firmly without coming through the other face.
  • Ask for product specifications. Product dimensions, material and finish should be stated clearly. The Bureau of Indian Standards publishes standards for many door fittings, for example IS 204 for tower bolts and IS 1341 for steel butt hinges. These standards help you understand how each item is described and measured, so it is reasonable to ask a seller which specification a product follows.
  • Plan quantities for the whole home. Count doors by type before you visit the shop so you buy the right number of each kit.

Where to buy LUMA door hardware kits in Pune

LUMA works directly with hardware retailers, so you buy through a local shop where you can see the finish and check the fittings in hand. Whether you are fitting out a new flat in Wakad, Kharadi or Hadapsar, or replacing fittings in an older home near Raviwar Peth or Sinhagad Road, ask your nearby hardware store about the LUMA range.

Hardware retailers who want to stock LUMA door kits, and buyers who want help finding a LUMA retailer near them, can contact the LUMA team with the door types and quantities they need. Explore the LUMA catalogue first to shortlist designs, and your enquiry will move faster.

Frequently asked questions

What is included in a door hardware kit from LUMA?

A LUMA door kit includes an aldrop, a pair of patti handles, tower bolts, a latch, a door stopper, and the U-clamps and brackets that receive the bolts on the frame. All parts come in one matching stainless steel or golden finish. Exact contents vary by kit, so check the product page or packing list.

Are hinges included in a door hardware kit?

No. Hinges are chosen separately because the right size depends on the door height, thickness and weight. LUMA offers pin hinges and welded hinges that you can select alongside your kit.

Does a door hardware kit include a lock?

LUMA door kits use an aldrop with a padlock loop for locking from outside, plus tower bolts and a latch for securing the door from inside. If you want a door that locks with a key, a tubular key lock is fitted separately.

Which finish is better for a bathroom door kit?

Stainless steel is the practical choice for bathrooms because the area sees regular moisture and splashes. A mini bathroom kit covers the essentials, such as handles and a latch, without parts a bathroom door does not need.

Can I buy a single aldrop or handle instead of a full kit?

Yes. LUMA sells aldrops, tadi and patti handles as loose components, so you can replace only the worn part. Match the finish to your existing fittings so the door looks consistent.

Need this hardware in bulk?

Send us the specification and quantities you need. We supply retailers, contractors and fabricators direct, with no distributor in between.

More from the blog

All articles